fbpx

DJI Ronin-S: How to Update the Firmware with PC

DJI Ronin-S_ How to Update the Firmware with PC

In this tutorial, we’ll show you how to update the Firmware of your DJI Ronin S via your PC with DJI Pro Assistant.

Before you start, you’ll need to ensure the following:

  • Your Ronin-S battery level is higher than 50%. The firmware update will fail if the camera stabilisers’s battery power is less than 50%.
  • We recommended that your Ronin-S is turned off whilst being updated.
  • Before using the Ronin-S make sure to assemble and balance the stabiliser. You can find our guide on how to balance the Ronin-S here.

Connect the Ronin-S to the PC with the standard Type-C cable.

Ronin-S Firmware Update - 1

Launch DJI Pro Assistant for Ronin and log in to your DJI account.

Ronin-S Firmware Update - 2

Click ‘RONIN-S’ to enter the firmware upgrade page and wait for the firmware list to refresh.

Ronin-S Firmware Update - 3

Select the required firmware version and then click ‘UPGRADE’.

Ronin-S Firmware Update - 4After the firmware is downloaded, the gimbal will automatically update.

Ronin-S Firmware Update - 5

After the update is complete, restart the Ronin-S.

Ronin-S Firmware Update - 6

Your Ronin-S is ready to go. You can get back to shooting the best possible footage with the latest firmware.


We hope this tutorial has been helpful; for more DJI Ronin-S tutorials please visit our Technical Support Hub.

For more information about the DJI Ronin-S, please contact our sales team on 0330 111 8800 or submit your details below and we will be in touch ASAP:


Shop all DJI Ronin-S

© Uplift Drone Training T/A Uplift Drones 2017-2019 - All rights reserved. Company No: 10064089. VAT No: 260036345.
This site is protected by reCAPTCHA. The Google Privacy Policy and Terms of Service apply.