DJI Mavic Pro: How to Mount and Detach the Propellers

In this tutorial, we’ll show you how to mount and detach the DJI Mavic Pro and/or Mavic Pro Platinum propellers.

Before you start, you’ll need to ensure the following:

• Your Mavic Pro / Mavic Pro Platinum aircraft is turned off and the arms are extended.

---

Mounting the Mavic Pro Propellers

You will have two sets of propellers with marks and two unmarked sets:

The mark is used to indicate which direction the propeller should rotate:

Firstly, take the marked set of propellers and attach them to the corresponding marked motor mounting base:

Then press the propeller down, whilst rotating it clockwise until it is firmly locked in:

Next, attach the sets of unmarked propellers to the corresponding unmarked motor mounting bases:

Press the propeller down, whilst rotating it anti-clockwise until it is firmly locked in:

You should then check the propellers are secure by holding the motors whilst rotating the propellers:

---

Detaching the Mavic Pro Propellers

Hold the motors whilst pressing the propellers down into the mounting base and rotate them in the opposite direction to unlock:

Your propellers will now have successfully detached from the motor mounting base:

---

We hope this tutorial has been helpful; for more DJI Mavic Pro and DJI Mavic Pro Platinum tutorials please visit our Technical Support Hub.

When flying a drone recreationally, always remember to operate within the legal limitations and regulations of the country and area you are flying in.

For more information about operating your Mavic Pro / Mavic Pro Platinum for commercial operations, please contact our training team on 0330 111 8800 or submit your details below and we will be in touch ASAP:

---

Shop all DJI Mavic Pro / Platinum Series