In this tutorial, we’ll show you how to use the Spotlight accessory for DJI Mavic 2 Enterprise and/or Mavic 2 Enterprise Dual.
Before you start, you’ll need to ensure the following:
- Your Mavic 2 Enterprise is turned off when attaching and detaching the Spotlight accessory.
- Turn your aircraft on once you are sure the accessory is fixed securely.
Firstly, you will need to remove the extended port cover from the top of your Mavic 2 Enterprise or Mavic 2 Enterprise Dual:
Next, you can attach the M2E Spotlight onto the top of the aircraft by inserting the USB plug into the port:
To ensure it is securely fixed onto the aircraft, tighten both screws on either side of the Spotlight:
You can only adjust the Spotlight angle (0° to 45°) manually before flight:
Once you have mounted and adjusted the Spotlight, the aircraft will auto-recognise the accessory in DJI Pilot app and the Spotlight icon will appear on your display:
Then simply click the Spotlight icon to switch it on and off:
You can adjust the Spotlight brightness and switch it off and on via the Spotlight settings, which can be found in ‘General Settings’ (three horizontal white dots in the top right of the main display):
When removing the Spotlight from your Mavic 2 Enterprise, ensure that the aircraft is turned off and you replace the extended port cover on the roof of your aircraft:
We hope this tutorial has been helpful; for more DJI Mavic 2 Enterprise tutorials please visit our Technical Support Hub.
When flying a drone recreationally, always remember to operate within the legal limitations and regulations of the country and area you are flying in.
For more information about operating your Mavic 2 Enterprise for commercial operations, please contact our training team on 0330 111 8800 or submit your details below and we will be in touch ASAP: