In this tutorial, we’ll show you how to activate the self-heating battery function for DJI Mavic 2 Enterprise and/or Mavic 2 Enterprise Dual intelligent flight battery.
Note: This function can be activated when the battery’s temperature is between -10°C to 6°C.
Before you start, you’ll need to ensure the following:
- Your Mavic 2 Enterprise battery level is higher than 50% (preferably 100% charged).
There are two different ways to enable your M2E battery’s self-heating function:
Manually Activate Intelligent Battery Self-Heating Function
Firstly, you will need to turn off the battery. Then, press and hold the battery button for 5 seconds to enter self-heating mode:
The Battery Status Indicator will flash green slowly, whilst simultaneously showing the battery level:
To stop the battery self-heating, simply press and hold the battery button for 5 seconds again.
Automatically Activate Intelligent Battery Self-Heating Function
When the battery is secured to your (powered on) Mavic 2 Enterprise / Dual aircraft and it meets the self-heating requirements (see image) then it will start self-heating automatically:
The Battery Status Indicator will flash green slowly, whilst simultaneously showing the battery level.
If you turn the drone off, then the battery will stop self-heating:
Intelligent Battery Heat Retention State
The Mavic 2 Enterprise Intelligent Battery will enter a heat retention state when the battery’s temperature is above 8°C. The Battery Status Indicator will blink in a clockwise rotation to signify this:
It can stay in the heat retention state for a maximum of 20 minutes and will automatically exit this state once the battery meets the conditions to stop self-heating, or once it’s reached the maximum time limit.
We hope this tutorial has been helpful; for more DJI Mavic 2 Enterprise tutorials please visit our Technical Support Hub.
When flying a drone recreationally, always remember to operate within the legal limitations and regulations of the country and area you are flying in.
For more information about operating your Mavic 2 Enterprise for commercial operations, please contact our training team on 0330 111 8800 or submit your details below and we will be in touch ASAP: